Is this true? - Politics Forum.org | PoFo

Wandering the information superhighway, he came upon the last refuge of civilization, PoFo, the only forum on the internet ...

The Second World War (1939-1945).
Forum rules: No one line posts please.
By cowofzot
#13436568
The hardness bit?


The Tiger used rolled homogeneous nickel-steel plate armor which had the highest level of hardness of any armor during world war 2. This allowed the Tiger to engage enemy tanks even on closer ranges without taking too much damage itself.
http://www.worldwar2aces.com/tiger-tank/


Here's where much of that Nickel came from for the detailers among us.

During the first part of war Germany mostly used the nickel they got from France to build tanks etc. But in 1943 the nickel of Petsamo covered some 73% of the German use and in 1944 even up to 87%.

Between 1940-42 Petsamo delivered 2,900 tons of PURE nickel ( counted as pure while most of it was sent to Germany to be purified ) and 43-44 12,900 tons ( also turned into pure nickel figures ).


Here's where Petsamo is, north Finland.

http://commons.wikimedia.org/wiki/File: ... rtu_de.png

Some from Norway also.

20 % of high grade steel came from there, ( in fact the Knaben mine produced Molybdenum used to harder steel used on German tanks). Knaben - Wikipedia, the free encyclopedia
By cowofzot
#13437127
Well, found this...

The rolled homogeneous nickel-steel plate, electro-welded interlocking-plate construction armor had a Brinell hardness index of 255-260, making it the best homogeneous armor hardness level for WW II standards. Rigorous quality control procedures ensured it stayed that way. The Tiger I's armor was therefore far superior to that of the Panther, whose armor had a much higher Brinell index, and was consequently very brittle

http://modelingmadness.com/reviews/misc ... ctiger.htm

While food trucks have increased dramatically in […]

If white people care so much about living in white[…]

Well if you are clever enough to know that our el[…]

If your argument centers around not believing in […]